Pressure Relief Vents
PRV-F② Pressure Relief Vent
-
- Single-way venting
- 240 minute fire resistance test to BS EN 1634-1: 2014 + A1 2018
- Default pressure setting: 45Pa
- Serial Number Traceability
- 10 Year Warranty as Standard
- Used in the Pressurisation of Stairwells
Get a quoteThe installation of stair pressurisation systems in multi-storey and high-rise buildings is crucial for facilitating evacuation, preserving human lives, and reducing property losses. These systems use air pressure differentials to prevent the spread of smoke, ensuring safe means of escape in the event of a fire.
The maximum and minimum stairwell pressure parameters should be sustained within agreed parameters prescribed within BS EN 12101-6:2005.
Properly designed pressure relief vents are the proven method of maintaining these set pressures. Apreco’s extensive range of standard air pressure relief vents (sometimes referred to as dampers) are characterised by superior design, a 240-minute fire-resistance rating, serial number traceability and ease of installation.
A variety of bespoke external solutions are also available, including weather protection using fixed low loss louvres and penthouse louvre assemblies.
Bespoke designs can handle all flow/pressure requirements in the pressurisation of stairwells built to BS EN 12101-6:2005 (replacing BS 5588- 4:1998).
Apreco’s range of pressure relief vents can also be adapted for use where there is a requirement for industrial applications.
The PRV vents have also been used in applications for the Defence Industry in combination with security louvres.
-
-
Stairwells
The pressurisation of stairwells with a pressure relief vent is an increasingly common method of ensuring safe means of exit from a building. Pressure control must be in place to maintain minimum and maximum stairwell pressures within agreed parameters.
BS EN 12101-6:2005 (replacing BS 5588-4:1998) requires pressurised fire escapes to be maintained at 50Pa and limited to a maximum of 60Pa.
Apreco’s pressure relief vent is characterised by ease of installation. For internal siting, the blade balancing system allows vertical, horizontal and inclined mounting. A variety of bespoke external solutions are also available, including weather protection using fixed or motorised low loss louvres and penthouse assemblies.
The PRV-F② holds a 4-hour fire integrity to BS EN 1634-1: 2014
-
Vent Sizes
Standard stock models shown and sized. Bespoke sizes available upon request
Metric
Model Volumetric Flow
Rate (L/s)Nominal Size
(W x H mm)Maximum size*
(W x H mm)Aperture size
(W x H mm)Weight**
(Kg)PRV-F②-0303 440 @ 45pa
465 @ 50pa300 x 300 440 x 452 360 x 370 9.0Kg PRV-F②-0505 1190 @ 45pa
1255 @ 50pa500 x 500 640 x 652 560 x 570 17.0Kg PRV-F②-0707 2300 @ 45pa
2430 @ 50pa700 x 700 840 x 852 760 x 770 29Kg PRV-F②-1010 4645 @ 45pa
4910 @ 50pa1000 x 1000 1140 x 1152 1060 x 1070 51Kg * Cover Grille maximum dimensions are 10mm greater than the stated PRV Vent maximum size.
** Weights are indicative and relate to PRV Vent and Wall Liner combined.Wall Depths
Vent Position Accessory Wall Depth Range PRV-F②-0303 and upwards Internal
ExternalWall Liner
Fixed Weather Louvre115-200mm
190-200mmDeeper walls can be accommodated with the use of our easy-fit wall liner extension sleeves in 75mm increments. For doors and thin walls, the use of our C-frame Kit can be utilised.
Imperial
Model Volumetric Flow
Rate (ft3/s)Nominal Size
(W x H in)Maximum size*
(W x H in)Aperture size
(W x H in)Weight**
(lb)PRV-F②-0303 15.54 @ 0.18in wc
16.42 @ 0.2in wc11.80 x 11.80 17.32 x 17.79 14.17 x 14.57 19lb 13oz PRV-F②-0505 42.02 @ 0.18in wc
44.3 @ 0.2in wc19.70 x 19.70 25.20 x 25.67 22.04 x 22.44 37lb 7oz PRV-F②-0707 81.22 @ 0.18in wc
85.81 @ 0.2in wc27.60 x 27.60 33.07 x 33.54 29.92 x 30.31 63lb 14oz PRV-F②-1010 164 @ 0.18in wc
173.4 @ 0.2in wc39.40 x 39.40 44.88 x 45.35 41.73 x 42.13 112lb 6oz * Cover Grille maximum dimensions are 0.39″ greater than the stated PRV Vent maximum size.
** Weights are indicative and relate to PRV Vent and Wall Liner combined.Wall Depths
Vent Position Accessory Wall Depth Range PRV-F②-0303 and upwards Internal
ExternalWall Liner
Fixed Weather Louvre4.25-7.87in
7.48-7.87inDeeper walls can be accommodated with the use of our easy-fit wall liner extension sleeves in 2.9” increments. For doors and thin walls, the use of our C-frame Kit can be utilised.
-
Internal Wall Installation
This typical installation consists of:
2 x Cover Grilles
1 x PRV Vent
1 x Wall LinerExternal Wall Installation
This typical installation consists of:
1 x PRV Vent
1 x Weather Louvre or Dynamic Cover SealDeep Wall Installation
This typical installation consists of:
1 x PRV Vent
1 x Extension Sleeve
1 x Wall LinerNarrow Wall Installation
This typical installation consists of:
1 x PRV Vent
1 x C-Frame Kit
1 x Wall LinerWall Liner
The Wall Liner is used to line the cavity produced in the substrate and with flanges that match that of the vent to produce a clean professional looking installation.
Cover Grilles
Apreco’s extensive range of cover grilles can be fitted directly to both the vent and Wall Liner through the provided fixing holes, not impeding on the Free Vent Area.
Extension Sleeve
The Extension Sleeve allows the Pressure Relief Vent to be installed in deeper walls, increasing the depth of the installation by up to a maximum of 75mm.
Fixed Weather Louvre
Apreco’s High Free Vent Area (FVA) Fixed Weather Louvre (FWL) is used on external installations offers a large 65% FVA while ensuring the vent is protected from the outside elements.
Security Weather Louvre
The Security Weather Louvre has been designed specifically for use with Apreco’s range of Pressure Relief Vents with low loss 65% Free Vent Area. Robust design with a burglar-resistant rating of BR2.
C-Frame Kit
The C-Frame Kit allows the Vent to be installed in narrow walls. Each C-Frame Kit decreases the wall depth requirement of the installation by 135mm.
Narrow C-Frame Kit
The Narrow C-Frame Kit allows the Vent to be installed in narrow walls. Each Narrow C-Frame Kit decreases the wall depth requirement of the installation by 50mm.
Security Grilles
Apreco’s security grilles are designed to offer a light to medium-security deterrent where Fire suppression and pressure relief vents could become subject to such environments.
Dynamic Cover Seal
The Dynamic Cover Seal (DCS) is used in conjunction with the IGV or PRV-F in positive venting applications, where additional sealing of the enclosure is required.
-
Just a few details to fill in...
Pressure Relief Vents
PRV-123 Pressure Relief Vent
- Single-way Pressure Relief Vent designed for air pressure relief of stairwells to EN 12101-6 and other industrial applications.
Pressure Relief Vents
IGV-R Gas Vent Reverse Flow
- The IGV-R gas vent is designed specifically for under-pressure venting associated with synthetic gas Fire Suppression Systems.
Pressure Relief Vents
SGV Dual Flo® Halocarbon Pressure Relief Vent
- SGV Dual Flo® Halocarbon Pressure Relief Vent with market leading free vent area designed specifically for Synthetic Gas Fire Suppression Systems.
